1. Money
Transfer Molding
<Back to Last Page>     <Glossary Home>     <Random Word>
<Preface>     <Suggest a Word>     <CRC Press Catalog>
<Abbreviations/Acronyms>     <Symbols>
| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z

Newsletters
Stay up-to-date!
Subscribe to newsletters

Tell us your email address:

About Composites/Plastics
About Industry & Business
 
Definition: A molding process used for thermosetting resins. The molding material, which may be preheated, is placed in an open pot at the top of a closed mold. A plunger is placed in the pot above the material. Pressure applied by a press platen to the plunger forces the molding material into the gates, runners and cavities of the heated mold. Following a heating cycle during which the material is cured the press is opened and the parts are ejected.
Definition Copyright ©1989 CRC Press LLC. All rights reserved.

<Back to Last Page>     <Glossary Home>     <Random Word>
<Preface>     <Suggest a Word>     <CRC Press Catalog>
<Abbreviations/Acronyms>     <Symbols>
| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z

©2014 About.com. All rights reserved.